pro2_av2_cp2_cp2e_rack2_pac2_4.003.0015.txt
program is bypassed.
- Change the DHCP retry task so that it will immediately retry on the first
failure so that if the DHCP request fails because of an IP conflict, we do
not wait for 15 minutes.
- Improved Ethernet Autodiscovery protocol to be more robust.
- Changed the printing of dots at program startup to indicate logic waves with
the "~" character.
- Improved Serial communications between control system and Toolbox
- Removed the RS232 status from the WHO and SHOWHW commands for those systems
that cannot detect the RS232 levels at the serial console.
- Fixed an issue were the COPYFILE and MOVEFILE commands did not work for
filenames with spaces.
- Fixed a problem with the XSIG symbol where the output TX$ could overflow
the internal buffer and the serial input would get cut off.
- Fixed a problem with the Serial Demultiplexor (Special) symbol where its
doesn't obey the string header. It will pass any string even if the header is
wrong. Also, if the received string has a string ID that doesn't match the
parameter list of the SMRX, an error is generated (as it should) but no
further string inputs work (the generate errors).
Known Issues:
- When using STRING_PARAMETER arrays, the SIMPL Windows side should be fully
expanded. The unused parameters can be set to an empty string - i.e. "" - and
the output can be set to the signal name "//" (no quotes). If this is not
done, the control system will issue errors at startup for each output that is
not on the SIMPL symbol. i.e. if you declare STRING_PARAMETER Name[5][10],
and only use 2 of them in the SIMPL Symbol, you will get 3 errors at startup.
The errors reference an invalid index. The errors are cosmetic and can be
ignored; they do not cause any system issues. However, other legitimate
system error messages may scroll out of the log, so it is suggested to perform
the above workaround.
Build: 3.155.1240
February 13, 2007
- Implemented the new US DST schedule for clock driver symbols with the format
=1d. Also added a console command OLDUSDST which can be use to revert back to
the old schedule if a particular region is not following the new schedule or
the law changes back.
- Modified the DHCP operation to handle IP conflicts in a more timely manner.
- Fixed a crash introduced in 3.155.1143 when using SIMPL+ EVENT statements.
Known issue
- Control system will reboot if you issue the WHO console command with no Ethernet.
Build: 3.155.1143
June 20, 2006
- Support for the APADs.
- Support for Unicode symbol.
- Added a new status DNS_RESOLVED to the IPTABLE status field. Indicates that
the name has been resolved but the device has not been reached.
- Fixed several memory leaks.
- Changed gateway node keep-alive so that the timer is reset for transmits as
well as received from the device.
- Increase the available memory for compiled SIMPL+ code from 1M Byte to 2M
Bytes.
- Added a line to the INFO command to indicate the amount of memory allocated
for SIMPL+ compiled code.
- Removed the restriction on the TYPE command for files greater than 20 KBytes.
- Fixed a bug where packets written to the TMPC-1O panels could be corrupted.
This caused the panel to reboot.
- Added FORMAT command to format a compact flash card
Page 3
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais